Send us your requirements, we will provide the best solution for you!
Impregnated activated carbon is used for the adsorption of gases and vapours that are adsorbed by standard activated carbon very little or are not adsorbed at all. These are low-molecular and polar substances with a low concentration and toxic effects. The complex chemical reaction of a harmful substance with an impregnating agent brings about the removal of the substance from the air – harmful gases are chemically bonded to the impregnating agent in activated carbon (chemical adsorption).
The following is the parameter information of the impregnated activated carbon we mainly produce. We can also customize different impregnated agents to the special application.
|Subject||Impregnated activated carbon|
|Coarseness||30*60mesh, 4mm or customized|
|Iodine Absorb (mg/g)||≥900||≥1000||≥1100|
|Loading Density (g/l)||500600||600||580|
The Applications of impregnated activated carbon have been proven for:
Mercury removal from natural gas purification of waste odours, removal of chemicals;
Removal of hydrogen sulfide (H2S), Sulfur dioxide (SO2) from the biogas;
Removal of mercury during the production of hydrogen gas;
Fume purification in laboratory fume cabinets;
Home water treatment in bacteriostatic water filters;
Aldehydes, radio-active iodine, mercury and inorganic gases such as arsine and phosphine
Removal of war gases from NBC filters and gas masks ;
Acid gases, ammonia and amines removal from air.
PSA system to upgrade biogas
Remove acid gas and alkaline gas
The chemical adsorption of SO2, NOX, O3, NH3, and SH2
Packed is in 25kg or 500kg woven bags.other packaging is avaiable upon your request.